70-410 Exam Dump Free Updation Availabe In Lead2pass:
https://www.lead2pass.com/70-410.html
QUESTION 11
Hotspot Question
Your network contains an Active Directory domain named corp.contoso.com. The domain contains a domain controller named DC1. When you run ping dcl.corp.contoso.com, you receive the result as shown in the exhibit. (Click the Exhibit button.)
You need to ensure that DC1 can respond to the Ping command.
Which rule should you modify? To answer, select the appropriate rule in the answer area.
Answer:
QUESTION 12 70-410 Dumps,70-410 Exam Questions,70-410 New Questions,70-410 VCE,70-410 PDF
Your network contains an Active Directory domain named contoso.com.
The domain contains two domain controllers.
The domain controllers are configured as shown in the following table.
You install a new server named Server 1 that runs a Server Core Instillation of Windows Server 2012 R2.
You need to join Server 1 to the contoso.com domain.
The solution must minimize administrative effort.
What should you use?
A. The dsadd.exe command
B. The New-ADComputer cmdlet
C. The Djoin.exe command
D. The Add-Computer cmdlet
Answer: D
Explanation:
A. Adds specific types of objects to the directory
B. Creates a new Active Directory computer.
C. Use djoin for offline join in the perimeter network .
D. Add the local computer to a domain or workgroup.
http://technet.microsoft.com/en-us/library/ee617245.aspx
http://technet.microsoft.com/en-us/library/ff793312(v=ws.10).aspx
http://technet.microsoft.com/en-us/library/cc753708(v=ws.10).aspx http://technet.microsoft.com/en-us/library/hh849798.aspx
QUESTION 13 70-410 Dumps,70-410 Exam Questions,70-410 New Questions,70-410 VCE,70-410 PDF
Drag and Drop Question
You have a print server named Server1. Server1 runs Windows Server 2008 R2.
You have a file server named Server2. Server2 runs Windows Server 2012 R2.
You need to migrate all of the printers on Server1 to Server2.
Which actions should you perform on the servers2?
Answer:
Explanation:
printbrm -p all:org – Publishes all printers in the directory, or publishes printers that were published originally.
While the original server is still running, use the Printer Migration Wizard or the Printbrm.exe
command-line tool to export or back up the print information (such as settings, queues, and drivers) in a printer settings file. Then, import or restore this backup image to a destination server running Windows Server 2012 that has been configured to run as a print server.
http://technet.microsoft.com/en-us/library/jj134150.aspx
QUESTION 14 70-410 Dumps,70-410 Exam Questions,70-410 New Questions,70-410 VCE,70-410 PDF
Your network contains an Active Directory domain named contoso.com.
The domain contains a server named Server1.
Server1 runs Windows Server 2012 and is configured as the only domain controller.
You need to retrieve a list of all the user accounts.
The list must include the last time each user was authenticated successfully.
Which Windows PowerShell command should you run? (To answer, drag the appropriate cmdlet or property to the correct locations to complete the PowerShell command in the answer area. Each cmdlet or property may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.)
Answer:
Explanation:
To produce a listing of all the users and their last logon date, you can use a command.
Get-ADUser -Filter * -Properties “LastLogonDate” |
sort-object -property lastlogondate -descending |
Format-Table -property name, lastlogondate -AutoSize
http://blogs.technet.com/b/heyscriptingguy/archive/2010/07/20/hey-scripting-guy-how-can-i-use-windows-powershell-to-identify-inactive-user-accounts-in-active-directory-domain-services.aspx http://technet.microsoft.com/en-us/library/ee617192.aspx
http://technet.microsoft.com/en-us/library/cc732952(v=ws.10).aspx http://technet.microsoft.com/en-us/library/cc732979.aspx
QUESTION 15 70-410 Dumps,70-410 Exam Questions,70-410 New Questions,70-410 VCE,70-410 PDF
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2. Server1 contains a single virtual machine named VM1.
You need to ensure that a user named User1 can manage the virtual machine settings of VM1. The solution must minimize the number of permissions assigned to User1.
To which group should you add User1?
A. Server Operators
B. Administrators
C. Power Users
D. Hyper-V Administrators
Answer: D
Explanation:
This group can reduce the number of users that belong to the local Administrators group while providing users with access to Hyper-VSimplified authorization:
The Hyper-V Administrators group is introduced and is implemented as a local security group.
What value does this change add?
This group can reduce the number of users that belong to the local Administrators group while providingusers with access to Hyper-V.
What works differently?
The Hyper-V Administrators group is a new local security group. Add users to this group instead of thelocal Administrators group to provide them with access to Hyper-V. Members of the Hyper-V Administrators have complete and unrestricted access to all features of Hyper-V.
http://technet.microsoft.com/en-us/library/hh831410.aspx
QUESTION 16 70-410 Dumps,70-410 Exam Questions,70-410 New Questions,70-410 VCE,70-410 PDF
Your network contains an Active Directory domain named contoso.com.
The domain contains a server named Windows Server 2012 R2.
You create a group Managed Service Account named gservice1.
You need to configure a service named Service1 to run as the gservice1 account.
How should you configure Service1?
A. From the Services console, configure the General settings.
B. From Windows PowerShell, run Set-Service and specify the -StartupType parameter.
C. From a command prompt, run sc.exe and specify the config parameter.
D. From a command prompt, run sc.exe and specify the privs parameter.
Answer: C
Explanation:
A. General settings only allow you to stop, start and set type/paramaters
B. Set-Service provides a way for you to change the Description, StartupType, or DisplayName of a service
C. Modifies service configuration
D. Sets the response/action on service failure
http://windows.microsoft.com/en-us/windows-vista/using-system-configuration http://technet.microsoft.com/en-us/library/ee176963.aspx
http://technet.microsoft.com/en-us/library/cc990290(v=ws.10).aspx http://technet.microsoft.com/en-us/library/cc738230(v=ws.10).aspx
QUESTION 17 70-410 Dumps,70-410 Exam Questions,70-410 New Questions,70-410 VCE,70-410 PDF
Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named DC1 that runs Windows Server 2012 R2. A user named User1 attempts to log on to DO, but receives the error message shown in the exhibit. (Click the Exhibit button.)
You need to ensure that User1 can log on to DC1.
What should you do?
A. Modify the Account is sensitive and cannot be delegated setting of the User1 account.
B. Grant User1 the Allow log on locally user right.
C. Modify the Logon Workstations setting of the User1 account.
D. Add User1 to the Remote Management Users group.
Answer: B
Explanation:
Domain controllers, by default, restrict the types of user accounts that have the ability to log on locally.
Domain controllers, by default, restrict the types of user accounts that have the ability to log on locally.
By default, only members of the Account Operators, Administrators, Backup Operators, Print Operators, andServer Operators groups have the Allowed logon locally system right. If you want to grant a user account theability to log on locally to a domain controller, you must either make that user a member of a group that alreadyhas the Allowed logon locally system right or grant the right to that user account.
Edit Default Domain Controllers Policy Expand Computer Configuration, Policies, Windows
Settings, Security Settings, Local Policies, click UserRights Assignment.
Double-click Allow Logon Locally.
http://technet.microsoft.com/en-us/library/ee957044(v=ws.10).aspx
QUESTION 18 70-410 Dumps,70-410 Exam Questions,70-410 New Questions,70-410 VCE,70-410 PDF
Your network contains a single Active Directory domain named contoso.com. The network contains two subnets. The subnets are configured as shown in the following table.
The network contains a member server named Server1 that runs Windows Server 2012 R2. Server1 has the DHCP Server server role installed. Server1 is configured to lease IP addresses to the two subnets. You discover that computers on the Warehouse subnet that have static IP addresses can communicate with the computers on the MainOffice subnet. Computers on the Warehouse subnet that obtain an IP address automatically can only communicate with other computers on the Warehouse subnet.
You need to ensure that all of the computers on the Warehouse subnet can communicate with the computers on the MainOffice subnet.
Which DHCP option should you configure on Server1?
A. 003 Router
B. 011 Resource Location Servers
C. 020 Nonlocal Source Routing
D. 019 IP Layer Forwarding
Answer: A
QUESTION 19 70-410 Dumps,70-410 Exam Questions,70-410 New Questions,70-410 VCE,70-410 PDF
Your network contains an Active Directory domain named contoso.com. The network contains 500 client computers that run Windows 8. All of the client computers connect to the Internet by using a web proxy.
You deploy a server named Server1 that runs Windows Server 2012 R2. Server1 has the DNS Server server role installed.
You configure all of the client computers to use Server1 as their primary DNS server.
You need to prevent Server1 from attempting to resolve Internet host names for the client computers.
What should you do on Server1?
A. Configure the Security settings of the contoso.com zone.
B. Remove all root hints.
C. Create a primary zone named “.”.
D. Create a primary zone named “root”.
E. Create a primary zone named “GlobalNames”.
F. Create a forwarder that points to 169.254.0.1.
G. Create a stub zone named “root”.
H. Create a zone delegation for GlobalNames.contoso.com.
Answer: BC
QUESTION 20 70-410 Dumps,70-410 Exam Questions,70-410 New Questions,70-410 VCE,70-410 PDF
Your company has a remote office that contains 600 client computers on a single subnet.
You need to select a subnet mask for the network that will support all of the client computers.
The solution must minimize the number of unused addresses.
Which subnet mask should you select?
A. 255.255.252.0
B. 255.255.254.0
C. 255.255.255.0
D. 255.255.255.128
Answer: A
Explanation:
Using a subnet mask of 255.255.252.0 will result in the fewest number of unused IP addresses.
70-410 dumps full version (PDF&VCE): https://www.lead2pass.com/70-410.html
Large amount of free 70-410 exam questions on Google Drive: https://drive.google.com/open?id=0B3Syig5i8gpDcXAzcDVNOWI1blU
You may also need:
70-411 exam dumps: https://drive.google.com/open?id=0B3Syig5i8gpDSmRhaVRWcW5Cc1k
70-412 exam dumps: https://drive.google.com/open?id=0B3Syig5i8gpDcDUzczlzc2N6RkU
70-413 exam dumps: https://drive.google.com/open?id=1b83z5KIZUL3VTF7QfvaVypTlHDaUnZIE
70-414 exam dumps: https://drive.google.com/open?id=0B3Syig5i8gpDdzk4ajRnWG50TzA